Date: 08-11-2022
One of the most valuable tools in the distribution sector is a hand pallet truck. This low-tech piece of machinery has various uses and comes at an affordable price while not requiring any power source such as batteries. As they are lightweight and compact, these handy trucks can be placed on delivery vehicles so they are always accessible when needed.
When purchasing a hand truck, you want to choose one that will last for years and requires very little maintenance. You shouldn't replace your truck all the time or spend tons of money on repairs. A good rule of thumb is to find one with a long lifespan and low upkeep costs so you can save money in the long run!
Warehouse managers prioritize different things when it comes to horizontal movement. Some may want a vehicle that offers speed, maneuverability, load capacity, or easy operation; others may want one that will last longer than other options and potentially save them money on maintenance or replacement costs.
Fortunately, Smart Packaging Systems offers many choices and advice when it comes to choosing a hand pallet truck.
What Factors to Consider While Selecting A Hand Hydraulic Pallet Truck
Before jumping on which hand truck pallet to use, Smart Packaging Systems would like you to consider the following factors.
- Size of your warehouse.
- How much cost-effective it would be in the long term?
- Load handling capacity (pallet sizes and weights).
- Comparing a manual pallet truck with a hydraulic one isn’t always as simple as comparing bananas to oranges.
When To Pick A Hand Pallet Truck?
Manual pumping is used to operate the pallet truck lifting device via a handle drawbar. The pallet truck is moved by pulling on the drawbar and has an axis rotation mechanism that makes turns safe. Pallet trucks require non-slippery surfaces with slopes no greater than 10%.
Smart Packaging Systems' hand pallet truck has many advantages over its electric counterparts. The most notable is that the user doesn't need any special certifications, only training to prevent accidents if something goes wrong such as when a load falls out of place because it became stuck or one of the caster wheels locks up. It's also much easier to store since these kinds of trucks don't require an electric motor; all you have to do is keep it tucked away in your vehicle until you're ready for unloading it at your destination.
Hydraulic Pallet Trucks don't require a lot of training or expertise to operate. Easier and cheaper than their mechanical counterparts, they are perfect for movement in tight spaces and short-distance hauls in most commercial or industrial settings. Bottom line - Smart Packaging Systems Hydraulic Pallet Trucks will never disappoint you!
There are different types of hand pallet trucks for various needs that Smart Packaging Systems offers:
- Pallet trucks with adjustable forks, depending on the load.
- Low-noise models: useful when unloading in populated areas at night.
- Extra-flat models: perfect when loading full-size lumber.
- Quick lift models: require fewer pump strokes to lift a load.
What Is The Best Way To Move A Hand Pallet Truck: Push Or Pull?
Due to the hydraulics in a pallet truck, they can be pushed or pulled with an equal amount of force. The decision between pushing versus pulling is often one of personal preference, but it would most effective to push when you are either trying to move the vehicle forward or needing to maneuver around obstacles.
No matter what, when operated improperly, operating a pallet truck can result in injury. To keep yourself and others from harm, always push, pull and lift with your legs for balance instead of using your back to generate force. By doing this you will avoid straining your muscles or injuring your lower back.
When Should You Choose an Electric Pallet Truck?
Pallet trucks powered by electrically operated motors are easy to use due to the lack of strain on the operator. They are capable of traveling farther distances and carrying heavier loads than hand pallet trucks which require manual labor.
Smart Packaging Systems Powered Pallet Truck is perfect for transporting pallets of products over moderate to long distances on flat surfaces, or as an alternative to manual pallet trucks that might hurt your employee's back.
Choosing the correct Electric Pallet Truck depends largely on the weight of what you're trying to carry and how far or often you're traveling. Make sure that it can handle your heaviest loads while still being durable enough for regular use, so try to find a truck appropriate for both heavy and light duty.
You will also need to consider what the appropriate fork lengths are. If you plan on transporting pallets around often, then longer forks may be best - but if there isn't much room for maneuverability then shorter ones might suit your needs better.
Some Other Considerations
One important consideration when choosing a pallet truck is the environment it will be used in. Stainless steel trucks should be used in corrosive or hygienic environments. Additionally, adding a scale to your truck allows you to track weights for applications that need this information, such as transportation.
In Conclusion
Smart Packaging Systems’ hand pallet trucks' user-friendly and practical design will suit both left-handed and right-handed users. Sensitively lowering your load when you want to with the help of a special valve, this offers an effortless experience for everyone who operates it. With less pump force needed when operating the truck thanks to its easy and simple hydraulic system, there will be no need for lubricating connections which means that it runs smoothly without any problems at all!
The clear embossed markings will help you know exactly where your load is being positioned so it can be safely transferred from one place to another. Plus - durable, strong forks will ensure safety as well as stability whilst moving about inside warehouses or outside loading/unloading areas
By using the proper pallet truck, your logistics process will become easier for staff members to maneuver and it also protects them from injury due to improper handling. Always remember to check the warranty of what you're buying so that if anything were to happen the company would take responsibility and make sure you don't have any problems with it.
Chat With Us